In 2009 the BlackRock Group acquired Barclays Global Investors for a total sum of $13,5bn. The price was paid in part by shares ($6.9bn) and in part by cash ($6.6bn). The cash payment was paid by BlackRock Holdco 5 LLC – a US Delaware Company tax resident in the UK – but funded by the parent company by issuing $4bn loan notes to the LLC. In the years following the acquisition Blackrock Holdco 5 LLC claimed tax deductions in the UK for interest payments on the intra-group loans. The tax authorities (HMRC) denied tax deductions for the interest costs on two grounds: (1) HMRC claimed that no loans would have been made between parties acting at arm’s length, so that relief should be denied under the transfer pricing rules in Part 4 of the Taxation (International and Other Provisions) Act 2010. (2) HMRC also maintained that relief should be denied under the unallowable purpose rule in section 441 of the Corporation Tax Act 2009, on the basis that securing a tax advantage was the only purpose of the relevant loans. An appeal was filed by the BlackRock Group with the First Tier Tribunal, which in a decision issued in November 2020 found that an independent lender acting at arm’s length would have made loans to LLC5 in the same amount and on the same terms as to interest as were actually made by LLC4 (the “Transfer Pricing Issue”). The FTT further found that the Loans had both a commercial purpose and a tax advantage purpose but that it would be just and reasonable to apportion all the debits to the commercial purpose and so they were fully deductible by LLC5 (the “Unallowable Purpose Issue”). An appeal was then filed with the Upper Tribunal by the tax authorities. According to the judgment issued in 2022, the Upper Tribunal found that the First Tier Tribunal had erred in law and therefore allowed HMRC’s appeal on both the transfer pricing issue and the unallowable purpose issue. The First Tier Tribunal’s Decision was set aside and the tax authorities amendments to LLC5’s tax returns were confirmed. An appeal was then filed by BlackRock with the Court of Appeal. Judgment The Court of Appeal found that tax deductions for the interest on the Loans were not restricted under the transfer pricing rules (cf. ground 1 above) but instead disallowed under the unallowable purpose rule in section 441 of the Corporation Tax Act 2009 (cf. ground 2 above). Excerpt regarding application of transfer pricing rules “34. Paragraph 1.6 of both the 1995 and 2010 versions of the OECD guidelines explains that what Article 9 of the model convention seeks to do is to adjust profits by reference to “the conditions which would have obtained between independent enterprises in comparable transactions and comparable circumstances” (a comparable “uncontrolled transaction”, as opposed to the actual “controlled transaction”). The 2010 version adds that this comparability analysis is at the “heart of the application of the arm’s length principle”, while explaining at para. 1.9 that there are cases, for example involving specialised goods or services or unique intangibles, where a comparability analysis is difficult or complicated to apply. 35. In its discussion of comparability analysis, para. 1.15 of the 1995 version states: “Application of the arm’s length principle is generally based on a comparison of the conditions in a controlled transaction with the conditions in transactions between independent enterprises. In order for such comparisons to be useful, the economically relevant characteristics of the situations being compared must be sufficiently comparable. To be comparable means that none of the differences (if any) between the situations being compared could materially affect the condition being examined in the methodology (e.g. price or margin), or that reasonably accurate adjustments can be made to eliminate the effect of any such differences. In determining the degree of comparability, including what adjustments are necessary to establish it, an understanding of how unrelated companies evaluate potential transactions is required. Independent enterprises, when evaluating the terms of a potential transaction, will compare the transaction to the other options realistically available to them, and they will only enter into the transaction if they see no alternative that is clearly more attractive. For example, one enterprise is unlikely to accept a price offered for its product by an independent enterprise if it knows that other potential customers are willing to pay more under similar conditions. This point is relevant to the question of comparability, since independent enterprises would generally take into account any economically relevant differences between the options realistically available to them (such as differences in the level of risk or other comparability factors discussed below) when valuing those options. Therefore, when making the comparisons entailed by application of the arm’s length principle, tax administrations should also take these differences into account when establishing whether there is comparability between the situations being compared and what adjustments may be necessary to achieve comparability.” Similar text appears at paras. 1.33 and 1.34 of the 2010 version. 36. As can be seen from this, it is essential that the “economically relevant characteristics” are “sufficiently comparable”, in the sense of any differences either not having a material effect on the relevant condition (term) of the transaction, or being capable of being adjusted for with reasonable accuracy so as to eliminate their effect. 37. Paragraph 1.17 of the 1995 version expands on the concept of differences as follows: “… In order to establish the degree of actual comparability and then to make appropriate adjustments to establish arm’s length conditions (or a range thereof), it is necessary to compare attributes of the transactions or enterprises that would affect conditions in arm’s length dealings. Attributes that may be important include the characteristics of the property or services transferred, the functions performed by the parties (taking into account assets used and risks assumed), the contractual terms, the economic circumstances of the parties, and the business strategies pursued by the parties…” Again, this is reflected in the 2010 version, at ...

In 2009 the BlackRock Group acquired Barclays Global Investors for a total sum of $13,5bn. The price was paid in part by shares ($6.9bn) and in part by cash ($6.6bn). The cash payment was paid by BlackRock Holdco 5 LLC – a US Delaware Company tax resident in the UK – but funded by the parent company by issuing $4bn loan notes to the LLC. In the years following the acquisition Blackrock Holdco 5 LLC claimed tax deductions in the UK for interest payments on the intra-group loans. Following an audit in the UK the tax authorities disallowed the interest deductions. The tax authorities held that the transaction would not have happened between independent parties. They also found that the loans were entered into for an unallowable tax avoidance purpose. A UK taxpayer can be denied a deduction for interest where a loan has an unallowable purpose i.e, where a tax advantage is the company’s main purpose for entering into the loan relationship (section 441 of the Corporation Tax Act 2009). If there is such an unallowable purpose, the company may not bring into account for that period ….so much of any debit in respect of that relationship as is attributable to the unallowable purpose. An appeal was filed by the BlackRock Group. In November 2020 the First Tier Tribunal found that an independent lender acting at arm’s length would have made loans to LLC5 in the same amount and on the same terms as to interest as were actually made by LLC4 (the “Transfer Pricing Issue”). The FTT further found that the Loans had both a commercial purpose and a tax advantage purpose but that it would be just and reasonable to apportion all the debits to the commercial purpose and so they were fully deductible by LLC5 (the “Unallowable Purpose Issue”). An appeal was then filed with the Upper Tribunal by the tax authorities. Judgement of the Upper Tribunal The Upper Tribunal found that the First Tier Tribunal had erred in law and therefore allowed HMRC’s appeal on both the transfer pricing issue and the unallowable purpose issue. The First Tier Tribunal’s Decision was set aside and the tax authorities amendments to LLC5’s tax returns were confirmed. Transfer Pricing “The actual provision of the loans from LLC4 to LLC5 differed from any arm’s length provision in that the loans would not have been made as between independent enterprises. The actual provision conferred a potential advantage in relation to United Kingdom taxation. The profits and losses of LLC5, including the allowing of debits for the interest and other expenses payable on the Loans, are to be calculated for tax purposes as if the arm’s length provision had been made or imposed instead of the actual provision. In this case, no arm’s length loan for $4 billion would have been made in the form that LLC4 made to LLC5 and hence HMRC’s amendments to the relevant returns should be upheld and confirmed.” Unallowable Purpose “The FTT did not err in finding that LLC5 had both a commercial purpose and an unallowable tax advantage main purpose in entering into the Loans. However, it was wrong to decide that the just and reasonable apportionment was solely to the commercial purpose. But for the tax advantage purpose there would have been no commercial purpose to the Loans and all the relevant facts and circumstances lead inexorably to the conclusion that the loan relationship debits should be wholly attributed to the unallowable tax purpose and so disallowed.” ...

The difference between ex ante and ex post returns discussed in particular in Section D of Chapter VI arises in large part from risks associated with the uncertainty of future business outcomes. As discussed in paragraph 1.78 the ex ante contractual assumption of risk should provide clear evidence of a commitment to assume risk prior to the materialisation of risk outcomes. Following the steps in this section, the transfer pricing analysis will determine the accurate delineation of the transaction with respect to risk, including the risk associated with unanticipated returns. A party which, under these steps, does not assume the risk, nor contributes to the control of that risk, will not be entitled to unanticipated profits (or required to bear unanticipated losses) arising from that risk. In the circumstances of Example 3 (see paragraph 1.85), this would mean that neither unanticipated profits nor unanticipated losses will be allocated to Company A. Accordingly, if the asset in Example 3 were unexpectedly destroyed, resulting in an unanticipated loss, that loss would be allocated for transfer pricing purposes to the company or companies that control the investment risk, contribute to the control of that risk and have the financial capacity to assume that risk, and that would be entitled to unanticipated profits or losses with respect to the asset. That company or companies would be required to compensate Company A for the return to which it is entitled as described in paragraph 1.103 ...

A party should always be appropriately compensated for its control functions in relation to risk. Usually, the compensation will derive from the consequences of being allocated risk, and therefore that party will be entitled to receive the upside benefits and to incur the downside costs. In circumstances where a party contributes to the control of risk, but does not assume the risk, compensation which takes the form of a sharing in the potential upside and downside, commensurate with that contribution to control, may be appropriate ...

Guidance on the relationship between risk assumption in relation to the provision of funding and the operational activities for which the funds are used is given in paragraphs 6.60-6.64. The concepts reflected in these paragraphs are equally applicable to investments in assets other than intangibles ...

The consequences of risk allocation in Example 3 in paragraph 1.85 depend on analysis of functions under step 3. Company A does not have control over the economically significant risks associated with the investment in and exploitation of the asset, and those risks should be aligned with control of those risks by Companies B and C. The functional contribution of Company A is limited to providing financing for an amount equating to the cost of the asset that enables the asset to be created and exploited by Companies B and C. However, the functional analysis also provides evidence that Company A has no capability and authority to control the risk of investing in a financial asset. Company A does not have the capability to make decisions to take on or decline the financing opportunity, or the capability to make decisions on whether and how to respond to the risks associated with the financing opportunity. Company A does not perform functions to evaluate the financing opportunity, does not consider the appropriate risk premium and other issues to determine the appropriate pricing of the financing opportunity, and does not evaluate the appropriate protection of its financial investment. In the circumstances of Example 3, Company A would not be entitled to any more than a risk-free return as an appropriate measure of the profits it is entitled to retain, since it lacks the capability to control the risk associated with investing in a riskier financial asset. The risk will be allocated to the enterprise which has control and the financial capacity to assume the risk associated with the financial asset. In the circumstances of example, this would be Company B. Company A does not control the investment risk that carries a potential risk premium. An assessment may be necessary of the commercial rationality of the transaction based on the guidance in Section D.2 taking into account the full facts and circumstances of the transaction. (Company A could potentially be entitled to less than a risk-free return if, for example, the transaction is disregarded under Section D.2.) ...

In the circumstances of Example 2 in paragraph 1.84, the significant risks associated with generating a return from the manufacturing activities are controlled by Company A, and the upside and downside consequences of those risks should therefore be allocated to Company A. Company B controls the risk that it fails to competently deliver services, and its remuneration should take into account that risk, as well as its funding costs for the acquisition of the manufacturing plant. Since the risks in relation to the capacity utilisation of the asset are controlled by Company A, Company A should be allocated the risk of under-utilisation. This means that the financial consequences related to the materialisation of that risk including failure to cover fixed costs, write-downs, or closure costs should be allocated to Company A ...

In the circumstances of Example 1 in paragraph 1.83, Company A assumes and controls the development risk and should bear the financial consequences of failure and enjoy the financial consequences of success. Company B should be appropriately rewarded for the carrying out of its development services, incorporating the risk that it fails to do so competently ...

Following the guidance in this section, the accurately delineated transaction should then be priced in accordance with the tools and methods available to taxpayers and tax administrations set out in the following chapters of these Guidelines and taking into account the financial and other consequences of risk-assumption, and the remuneration for risk management. The assumption of a risk should be compensated with an appropriate anticipated return, and risk mitigation should be appropriately remunerated. Thus, a taxpayer that both assumes and mitigates a risk will be entitled to greater anticipated remuneration than a taxpayer that only assumes a risk, or only mitigates, but does not do both ...

In exceptional circumstances, it may be the case that no associated enterprise can be identified that both exercises control over the risk and has the financial capacity to assume the risk. As such a situation is not likely to occur in transactions between third parties, a rigorous analysis of the facts and circumstances of the case will need to be performed, in order to identify the underlying reasons and actions that led to this situation. Based on that assessment, the tax administrations will determine what adjustments to the transaction are needed for the transaction to result in an arm’s length outcome. An assessment of the commercial rationality of the transaction based on Section D.2 may be necessary ...

If it is established in step 4(ii) that the associated enterprise assuming the risk based on steps 1 – 4(i) does not exercise control over the risk or does not have the financial capacity to assume the risk, then the risk should be allocated to the enterprise exercising control and having the financial capacity to assume the risk. If multiple associated enterprises are identified that both exercise control and have the financial capacity to assume the risk, then the risk should be allocated to the associated enterprise or group of associated enterprises exercising the most control. The other parties performing control activities should be remunerated appropriately, taking into account the importance of the control activities performed ...

In light of the potential complexity that may arise in some circumstances when determining whether an associated enterprise assuming a risk controls that risk, the test of control should be regarded as being met where comparable risk assumptions can be identified in a comparable uncontrolled transaction. To be comparable those risk assumptions require that the economically relevant characteristics of the transactions are comparable. If such a comparison is made, it is particularly relevant to establish that the enterprise assuming comparable risk in the uncontrolled transaction performs comparable risk management functions relating to control of that risk to those performed by the associated enterprise assuming risk in the controlled transaction. The purpose of the comparison is to establish that an independent party assuming a comparable risk to that assumed by the associated enterprise also performs comparable risk management functions to those performed by the associated enterprise ...

If it is established that the associated enterprise assuming the risk as analysed under step 4(i) either does not control the risk or does not have the financial capacity to assume the risk, then the analysis described under step 5 needs to be performed ...

Where two or more parties to the transaction assume a specific risk (as analysed under step 4(i)), and in addition they together control the specific risk and each has the financial capacity to assume their share of the risk, then that assumption of risk should be respected. Examples may include the contractual assumption of development risk under a transaction in which the enterprises agree jointly to bear the costs of creating a new product ...

Furthermore, in some cases, there may be more than one party to the transaction exercising control over a specific risk. Where the associated enterprise assuming risk (as analysed under step 4(i)) controls that risk in accordance with the requirements set out in paragraphs 1.65 – 1.66, all that remains under step 4(ii) is to consider whether the enterprise has the financial capacity to assume the risk. If so, the fact that other associated enterprises also exercise control over the same risk does not affect the assumption of that risk by the first-mentioned enterprise, and step 5 need not be considered ...

In some cases, the analysis under step 3 may indicate that there is more than one MNE that is capable of exercising control over a risk. However, control requires both capability and functional performance in order to exercise control over a risk. Therefore, if more than one party is capable of exercising control, but the entity contractually assuming risk (as analysed under step 4(i)) is the only party that actually exercises control through capability and functional performance, then the party contractually assuming the risk also controls the risk ...

In the circumstances of Example 3, analysis under step 4(i) shows that the assumption of utilisation risk by Company A is consistent with its contractual arrangements with Company C, but under step 4(ii) it is determined that Company A does not control risks that it assumes associated with the investment in and exploitation of the asset. Company A has no decision-making function which allows it to control its risks by taking decisions that affect the outcomes of the risks. Under step 4(ii) the party assuming risk does not control that risk, and further consideration is required under step 5 ...

If the circumstances of Example 2 remain the same except for the fact that, while the contract specifies that Company A assumes supply chain risks, Company B is not reimbursed by Company A when there was a failure to secure key components on time, the analysis under step 4(i) would show that contractual assumption of risk has not been followed in practice in regard to that supply chain risk, such that Company B in fact assumes the downside consequences of that risk. Based on the information provided in Example 2, Company B does not have any control over the supply chain risk, whereas Company A does exercise control. Therefore, the party assuming risk as analysed under step 4(i), does not under step 4(ii) exercise control over that risk, and further consideration is required under step 5 ...

Under step 4(ii) it should be determined whether the party assuming the risk under the contract, taking into account whether the contractual terms have been applied in the conduct of the parties under step 4(i), controls the risk and has the financial capacity to assume the risk. If all the circumstances set out in Example 1 remain the same except for the fact that the contract between Company A and Company B allocates development risk to Company B, and if there is no evidence from the conduct of the parties under step 4(i) to suggest that the contractual allocation of risk is not being followed, then Company B contractually assumes development risk but the facts remain that Company B has no capability to evaluate the development risk and does not make decisions about Company A’s activities. Company B has no decision-making function which allows it to control the development risk by taking decisions that affect the outcomes of that risk. Based on the information provided in Example 1, the development risk is controlled by Company A. The determination that the party assuming a risk is not the party controlling that risk means that further consideration is required under step 5 ...

Consider for example, a manufacturer, whose functional currency is US dollars, that sells goods to an associated distributor in another country, whose functional currency is euros, and the written contract states that the distributor assumes all exchange rate risks in relation to this controlled transaction. If, however, the price for the goods is charged by the manufacturer to the distributor over an extended period of time in euros, the currency of the distributor, then aspects of the written contractual terms do not reflect the actual commercial or financial relations between the parties. The assumption of risk in the transaction should be determined by the actual conduct of the parties in the context of the contractual terms, rather than by aspects of written contractual terms which are not in practice applied. The principle can be further illustrated by Example 7 in the Annex to Chapter VI, where there is an inconsistency between the contractual assumption of risk and the conduct of the parties as evidenced by the bearing of costs relating to the downside outcome of that risk ...

In line with the discussion in relation to contractual terms (see Section D.1.1), it should be considered under step 4(i) whether the parties’ conduct conforms to the assumption of risk contained in written contracts, or whether the contractual terms have not been followed or are incomplete. Where differences exist between contractual terms related to risk and the conduct of the parties which are economically significant and would be taken into account by third parties in pricing the transaction between them, the parties’ conduct in the context of the consistent contractual terms should generally be taken as the best evidence concerning the intention of the parties in relation to the assumption of risk ...

The significance of step 4 will depend on the findings. In the circumstances of Examples 1 and above, the step may be straightforward. Where a party contractually assuming a risk applies that contractual assumption of risk in its conduct, and also both exercises control over the risk and has the financial capacity to assume the risk, then there is no further analysis required beyond step 4(i) and (ii) to determine risk assumption. Companies A and B in both examples fulfil the obligations reflected in the contracts and exercise control over the risks that they assume in the transaction, supported by financial capacity. As a result step 4(ii) is satisfied, there is no need to consider step 5, and the next step to consider is step 6 ...

Carrying out steps 1-3 involves the gathering of information relating to the assumption and management of risks in the controlled transaction. The next step is to interpret the information resulting from steps 1-3 and to determine whether the contractual assumption of risk is consistent with the conduct of the parties and the other facts of the case by analysing (i) whether the associated enterprises follow the contractual terms under the principles of Section D.1.1; and (ii) whether the party assuming risk, as analysed under (i), exercises control over the risk and has the financial capacity to assume risk ...

Company A has acquired ownership of a tangible asset and enters into contracts for the use of the asset with unrelated customers. Under step 1 utilisation of the tangible asset, that is the risk that there will be insufficient demand for the asset to cover the costs Company A has incurred, has been identified as an economically significant risk. Under step 2 it is established that Company A has a contract for the provision of services with another group company, Company C; the contract does not address the assumption of utilisation risk by the owner of the tangible asset, Company A. The functional analysis under step 3 provides evidence that another group company, Company B, decides that investment in the asset is appropriate in light of anticipated commercial opportunities identified and evaluated by Company B and its assessment of the asset’s anticipated useful life; Company B provides specifications for the asset and the unique features required to respond to the commercial opportunities, and arranges for the asset to be constructed in accordance with its specifications, and for Company A to acquire the asset. Company C decides how to utilise the asset, markets the asset’s capabilities to third-party customers, negotiates the contracts with these third party customers, assures that the asset is delivered to the third parties and installed appropriately. Although it is the legal owner of the asset, Company A does not exercise control over the investment risk in the tangible asset, since it lacks any capability to decide on whether to invest in the particular asset, and whether and how to protect its investment including whether to dispose of the asset. Although it is the owner of the asset, Company A does not exercise control over the utilisation risk, since it lacks any capability to decide whether and how to exploit the asset. It does not have the capability to assess and make decisions relating to the risk mitigation activities performed by other group companies. Instead, risks associated with investing in and exploiting the asset, enhancing upside risk and mitigating downside risk, are controlled by the other group companies. Company A does not have control over the economically significant risks associated with the investment in and exploitation of the asset. The functional contribution of the legal owner of the asset is limited to providing financing for an amount equating to the cost of the asset. However, the functional analysis also provides evidence that Company A has no capability and authority to control the risk of investing in a financial asset. Company A does not have the capability to make decisions to take on or decline the financing opportunity, or the capability to make decisions on whether and how to respond to the risks associated with the financing opportunity. Company A does not perform functions to evaluate the financing opportunity, does not consider the appropriate risk premium and other issues to determine the appropriate pricing of the financing opportunity, and does not evaluate the appropriate protection of its financial investment. Companies A, B and C all have financial capacity to assume their respective risks ...

Company B manufactures products for Company A. Under step 1 capacity utilisation risk and supply chain risk have been identified as economically significant in this transaction, and under step 2 it has been established that under the contract Company A assumes these risks. The functional analysis under step 3 provides evidence that Company B built and equipped its plant to Company A’s specifications, that products are manufactured to technical requirements and designs provided by Company A, that volume levels are determined by Company A, and that Company A runs the supply chain, including the procurement of components and raw materials. Company A also performs regular quality checks of the manufacturing process. Company B builds the plant, employs and trains competent manufacturing personnel, and determines production scheduling based on volume levels determined by Company A. Although Company B has incurred fixed costs, it has no ability to manage the risk associated with the recovery of those costs through determining the production units over which the fixed costs are spread, since Company A determines volumes. Company A also determines significant costs relating to components and raw materials and the security of supply. The evaluation of the evidence concludes that Company B performs manufacturing services. Significant risks associated with generating a return from the manufacturing activities are controlled by Company A. Company B controls the risk that it fails to competently deliver services. Each company has the financial capacity to assume its respective risks ...

Company A seeks to pursue a development opportunity and hires a specialist company, Company B, to perform part of the research on its behalf. Under step 1 development risk has been identified as economically significant in this transaction, and under step 2 it has been established that under the contract Company A assumes development risk. The functional analysis under step 3 shows that Company A controls its development risk through exercising its capability and authority in making a number of relevant decisions about whether and how to take on the development risk. These include the decision to perform part of the development work itself, the decision to seek specialist input, the decision to hire the particular researcher, the decision of the type of research that should be carried out and objectives assigned to it, and the decision of the budget allocated to Company B. Company A has mitigated its risk by taking measures to outsource development activities to Company B which assumes the day-to- day responsibility for carrying out the research under the control of Company A. Company B reports back to Company A at predetermined milestones, and Company A assesses the progress of the development and whether its ongoing objectives are being met, and decides whether continuing investments in the project are warranted in the light of that assessment. Company A has the financial capacity to assume the risk. Company B has no capability to evaluate the development risk and does not make decisions about Company A’s activities. Company B’s risk is mainly to ensure it performs the research activities competently and it exercises its capability and authority to control that risk through making decisions about the processes, expertise, and assets it needs. The risk Company B assumes is distinct from the development risk assumed by Company A under the contract, and which is controlled by Company A based on the evidence of the functional analysis ...

In this step the functions in relation to risk of the associated enterprises that are parties to the transaction are analysed. The analysis provides information about how the associated enterprises operate in relation to the assumption and management of the specific, economically significant risks, and in particular about which enterprise or enterprises perform control functions and risk mitigation functions, which enterprise or enterprises encounter upside or downside consequences of risk outcomes, and which enterprise or enterprises have the financial capacity to assume the risk. This step is illustrated by the following examples and conclusions are drawn from these examples in subsequent paragraphs of Section D.1.2 ...

The assumption of risk has a significant effect on determining arm’s length pricing between associated enterprises, and it should not be concluded that the pricing arrangements adopted in the contractual arrangements alone determine which party assumes risk. Therefore, one may not infer from the fact that the price paid between associated enterprises for goods or services is set at a particular level, or by reference to a particular margin, that risks are borne by those associated enterprises in a particular manner. For example, a manufacturer may claim to be protected from the risk of price fluctuation of raw material as a consequence of its being remunerated by another group company on a basis that takes account of its actual costs. The implication of the claim is that the other group company bears the risk. The form of remuneration cannot dictate inappropriate risk allocations. It is the determination of how the parties actually manage and control risks, as set out in the remaining steps of the process of analysing risk, which will determine the assumption of risks by the parties, and consequently dictate the selection of the most appropriate transfer pricing method ...

However, it does not follow that every contractual exchange of potentially higher but riskier income for lower but less risky income between associated enterprises is automatically arm’s length. The rest of the steps set out in this section describe the information required to determine how the associated enterprises operate in relation to the assumption and management of risk leading to the accurate delineation of the actual transaction in relation to risk ...

It is economically neutral to take on (or lay off) risk in return for higher (or lower) anticipated nominal income as long as the net present value of both options are equal. Between unrelated parties, for example, the sale of a risky income-producing asset may reflect in part a preference of the seller to accept a lower but more certain amount of nominal income and to forego the possibility of higher anticipated nominal income it might earn if it instead retained and exploited the asset. In a without-recourse debt factoring arrangement between independent enterprises, for example, the seller discounts the face value of its receivables in return for a fixed payment, and so accepts a lower return but has reduced its volatility and laid off risk. The factor will often be a specialised organisation which has the capability to decide to take on risk and to decide on how to respond to the risk, including by diversifying the risk and having the functional capabilities to mitigate the risk and generate a return from the opportunity. Neither party will expect to be worse off as a result of entering into the arrangement, essentially because they have different risk preferences resulting from their capabilities in relation to the specific risk. The factor is more capable of managing the risk than the seller and terms acceptable to both parties can be agreed ...

A contractual assumption of risk constitutes an ex ante agreement to bear some or all of the potential costs associated with the ex post materialisation of downside outcomes of risk in return for some or all of the potential benefit associated with the ex post materialisation of positive outcomes. Importantly, ex ante contractual assumption of risk should provide clear evidence of a commitment to assume risk prior to the materialisation of risk outcomes. Such evidence is a very important part of the tax administration’s transfer pricing analysis of risks in commercial or financial relations, since, in practice, an audit performed by the tax administration may occur years after the making of such up-front decisions by the associated enterprises and when outcomes are known. The purported assumption of risk by associated enterprises when risk outcomes are certain is by definition not an assumption of risk, since there is no longer any risk. Similarly, ex post reallocations of risk by a tax administration when risk outcomes are certain may, unless based on the guidance elsewhere in these Guidelines and in particular Section D.1.2.1, be inappropriate ...

The identity of the party or parties assuming risks may be set out in written contracts between the parties to a transaction involving these risks. A written contract typically sets out an intended assumption of risk by the parties. Some risks may be explicitly assumed in the contractual arrangements. For example, a distributor might contractually assume accounts receivable risk, inventory risk, and credit risks associated with the distributor’s sales to unrelated customers. Other risks might be implicitly assumed. For example, contractual arrangements that provide non- contingent remuneration for one of the parties implicitly allocate the outcome of some risks, including unanticipated profits or losses, to the other party ...

Control over a specific risk in a transaction focusses on the decision-making of the parties to the transaction in relation to the specific risk arising from the transaction. This is not to say, however, that in an MNE group other parties may not be involved in setting general policies that are relevant for the assumption and control of the specific risks identified in a transaction, without such policy-setting itself representing decision making. The board and executive committees of the group, for example, may set the level of risk the group as a whole is prepared to accept in order to achieve commercial objectives, and to establish the control framework for managing and reporting risk in its operations. Line management in business segments, operational entities, and functional departments may identify and assess risk against the commercial opportunities, and put in place appropriate controls and processes to address risk and influence the risk outcomes arising from day-to-day operations. The opportunities pursued by operational entities require the ongoing management of the risk that the resources allocated to the opportunity will deliver the anticipated return. For example, finished product inventory risk in a supply transaction between two associated enterprises may be controlled by the party with the capability to determine the production volumes together with the performance of that decision- making. The way that inventory risk in the transaction between two associated enterprises is addressed may be subject to policy-setting elsewhere in the MNE group about overall levels of working capital tied up in inventory, or co-ordination of appropriate minimum stocking levels across markets to meet strategic objectives. This wider policy-setting however cannot be regarded as decisions to take on, lay off, decline, or mitigate the specific inventory risk in the example of the product supply transaction in this paragraph ...

In the second situation, a multinational toy retailer buys a wide range of products from a number of third-party manufacturers. Most of its sales are concentrated in the last two months of the calendar year, and a significant risk relates to the strategic direction of the buying function, and in making the right bets on trends and determining the products that will sell and in what volumes. Trends and the demand for products can vary across markets, and so expertise is needed to evaluate the right bets in the local market. The effect of the buying risk can be magnified if the retailer negotiates a period of exclusivity for a particular product with the third- party manufacturer ...

In the first situation the MNE group distributes heating oil to consumers. Analysis of the economically relevant characteristics establishes that the product is undifferentiated, the market is competitive, the market size is predictable, and players are price-takers. In such circumstances, the ability to influence margins may be limited. The credit terms achieved from managing the relationship with the oil suppliers fund working capital and are crucial to the distributor’s margin. The impact of the risk on cost of capital is, therefore, significant in the context of how value is created for the distribution function ...

Determining the economic significance of risk and how risk may affect the pricing of a transaction between associated enterprises is part of the broader functional analysis of how value is created by the MNE group, the activities that allow the MNE group to sustain profits, and the economically relevant characteristics of the transaction. The analysis of risk also helps to determine comparability under the guidance in Chapter III. Where potential comparables are identified, it is relevant to determine whether they include the same level of risks and management of risks. The economic significance of risk may be illustrated by the following two situations ...

Risks can be categorised in various ways, but a relevant framework in a transfer pricing analysis is to consider the sources of uncertainty which give rise to risk. The following non-exclusive list of sources of risk is not intended to suggest a hierarchy of risk. Neither is it intended to provide rigid categories of risk, since there is overlap between the categories. Instead, it is intended to provide a framework that may assist in ensuring that a transfer pricing analysis considers the range of risks likely to arise from the commercial or financial relations of the associated enterprises, and from the context in which those relations take place. Reference is made to risks that are externally driven and those that are internally driven in order to help clarify sources of uncertainty. However, there should be no inference that externally driven risks are less relevant because they are not generated directly by activities. On the contrary, the ability of a company to face, respond to and mitigate externally driven risks is likely to be a necessary condition for a business to remain competitive. Importantly, guidance on the possible range of risk should assist in identifying material risks with specificity. Risks which are vaguely described or undifferentiated will not serve the purposes of a transfer pricing analysis seeking to delineate the actual transaction and the actual allocation of risk between the parties. a) Strategic risks or marketplace risks. These are largely external risks caused by the economic environment, political and regulatory events, competition, technological advance, or social and environmental changes. The assessment of such uncertainties may define the products and markets the company decides to target, and the capabilities it requires, including investment in intangibles and tangible assets, as well as in the talent of its human capital. There is considerable potential downside, but the upside is also considerable if the company identifies correctly the impact of external risks, and differentiates its products and secures and continues to protect competitive advantage. Examples of such risks may include marketplace trends, new geographical markets, and concentration of development investment. b) Infrastructure or operational risks. These are likely to include the uncertainties associated with the company’s business execution and may include the effectiveness of processes and operations. The impact of such risks is highly dependent on the nature of the activities and the uncertainties the company chooses to assume. In some circumstances breakdowns can have a crippling effect on the company’s operations or reputation and threaten its existence; whereas successful management of such risks can enhance reputation. In other circumstances, the failure to bring a product to market on time, to meet demand, to meet specifications, or to produce to high standards, can affect competitive and reputational position, and give advantage to companies which bring competing products to market more quickly, better exploit periods of market protection provided by, for example, patents, better manage supply chain risks and quality control. Some infrastructure risks are externally driven and may involve transport links, political and social situations, laws and regulations, whereas others are internally driven and may involve capability and availability of assets, employee capability, process design and execution, outsourcing arrangements, and IT systems. c) Financial risks. All risks are likely to affect a company’s financial performance, but there are specific financial risks related to the company’s ability to manage liquidity and cash flow, financial capacity, and creditworthiness. The uncertainty can be externally driven, for example by economic shock or credit crisis, but can also be internally driven through controls, investment decisions, credit terms, and through outcomes of infrastructure or operational risks. d) Transactional risks. These are likely to include pricing and payment terms in a commercial transaction for the supply of goods, property, or services. e) Hazard risks. These are likely to include adverse external events that may cause damages or losses, including accidents and natural disasters. Such risks can often be mitigated through insurance, but insurance may not cover all the potential loss, particularly where there are significant impacts on operations or reputation ...

There are many definitions of risk, but in a transfer pricing context it is appropriate to consider risk as the effect of uncertainty on the objectives of the business. In all of a company’s operations, every step taken to exploit opportunities, every time a company spends money or generates income, uncertainty exists, and risk is assumed. A company is likely to direct much attention to identifying uncertainties it encounters, in evaluating whether and how business opportunities should be pursued in view of their inherent risks, and in developing appropriate risk mitigation strategies which are important to shareholders seeking their required rate of return. Risk is associated with opportunities, and does not have downside connotations alone; it is inherent in commercial activity, and companies choose which risks they wish to assume in order to have the opportunity to generate profits. No profit- seeking business takes on risk associated with commercial opportunities without expecting a positive return. Downside impact of risk occurs when the anticipated favourable outcomes fail to materialise. For example, a product may fail to attract as much consumer demand as projected. However, such an event is the downside manifestation of uncertainty associated with commercial opportunities. Companies are likely to devote considerable attention to identifying and managing economically significant risks in order to maximise the positive returns from having pursued the opportunity in the face of risk. Such attention may include activities around determining the product strategy, how the product is differentiated, how to identify changing market trends, how to anticipate political and social changes, and how to create demand. The significance of a risk depends on the likelihood and size of the potential profits or losses arising from the risk. For example, a different flavour of ice-cream may not be the company’s sole product, the costs of developing, introducing, and marketing the product may have been marginal, the success or failure of the product may not create significant reputational risks so long as business management protocols are followed, and decision-making may have been effected by delegation to local or regional management who can provide knowledge of local tastes. However, ground-breaking technology or an innovative healthcare treatment may represent the sole or major product, involve significant strategic decisions at different stages, require substantial investment costs, create significant opportunities to make or break reputation, and require centralised management that would be of keen interest to shareholders and other stakeholders ...

Assume that an investor hires a fund manager to invest funds on its account. Depending on the agreement between the investor and the fund manager, the latter may be given the authority to make portfolio investments on behalf of the investor on a day-to-day basis in a way that reflects the risk preferences of the investor, although the risk of loss in value of the investment would be borne by the investor. In such an example, the investor is controlling its risks through four relevant decisions: the decision about its risk preference and therefore about the required diversification of the risks attached to the different investments that are part of the portfolio, the decision to hire (or terminate the contract with) that particular fund manager, the decision of the extent of the authority it gives to the fund manager and objectives it assigns to the latter, and the decision of the amount of the investment that it asks this fund manager to manage. Moreover, the fund manager would generally be required to report back to the investor on a regular basis as the investor would want to assess the outcome of the fund manager’s activities. In such a case, the fund manager is providing a service and managing his business risk from his own perspective (e.g. to protect his credibility). The fund manager’s operational risk, including the possibility of losing a client, is distinct from his client’s investment risk. This illustrates the fact that an investor who gives to another person the authority to perform risk mitigation activities such as those performed by the fund manager does not necessarily transfer control of the investment risk to the person making these day-to-day decisions ...

The concept of control may be illustrated by the following examples. Company A appoints a specialist manufacturer, Company B to manufacture products on its behalf. The contractual arrangements indicate that Company B undertakes to perform manufacturing services, but that the product specifications and designs are provided by Company A, and that Company A determines production scheduling, including the volumes and timing of product delivery. The contractual relations imply that Company A bears the inventory risk and the product recall risk. Company A hires Company C to perform regular quality controls of the production process. Company A specifies the objectives of the quality control audits and the information that Company C should gather on its behalf. Company C reports directly to Company A. Analysis of the economically relevant characteristics shows that Company A controls its product recall and inventory risks by exercising its capability and authority to make a number of relevant decisions about whether and how to take on risk and how to respond to the risks. Besides that Company A has the capability to assess and take decisions relating to the risk mitigation functions and actually performs these functions. These include determining the objectives of the outsourced activities, the decision to hire the particular manufacturer and the party performing the quality checks, the assessment of whether the objectives are adequately met, and, where necessary, to decide to adapt or terminate the contracts ...

Risk mitigation refers to measures taken that are expected to affect risk outcomes. Such measures may include measures that reduce the uncertainty or measures that reduce the consequences in the event that the downside impact of risk occurs. Control should not be interpreted as requiring risk mitigation measures to be adopted, since in assessing risks businesses may decide that the uncertainty associated with some risks, including risks that may be fundamental to their core business operations, after being evaluated, should be taken on and faced in order to create and maximise opportunities ...

References to control over risk should not necessarily be taken to mean that the risk itself can be influenced or that the uncertainty can be nullified. Some risks cannot be influenced, and are a general condition of commercial activity affecting all businesses undertaking that activity. For example, risks associated with general economic conditions or commodity price cycles are typically beyond the scope of an MNE group to influence. Instead control over risk should be understood as the capability and authority to decide to take on the risk, and to decide whether and how to respond to the risk, for example through the timing of investments, the nature of development programmes, the design of marketing strategies, or the setting of production levels ...

The capability to perform decision-making functions and the actual performance of such decision-making functions relating to a specific risk involve an understanding of the risk based on a relevant analysis of the information required for assessing the foreseeable downside and upside risk outcomes of such a decision and the consequences for the business of the enterprise. Decision-makers should possess competence and experience in the area of the particular risk for which the decision is being made and possess an understanding of the impact of their decision on the business. They should also have access to the relevant information, either by gathering this information themselves or by exercising authority to specify and obtain the relevant information to support the decision-making process. In doing so, they require capability to determine the objectives of the gathering and analysis of the information, to hire the party gathering the information and making the analyses, to assess whether the right information is gathered and the analyses are adequately made, and, where necessary, to decide to adapt or terminate the contract with that provider, together with the performance of such assessment and decision-making. Neither a mere formalising of the outcome of decision-making in the form of, for example, meetings organised for formal approval of decisions that were made in other locations, minutes of a board meeting and signing of the documents relating to the decision, nor the setting of the policy environment relevant for the risk (see paragraph 1.76), qualifies as the exercise of a decision-making function sufficient to demonstrate control over a risk ...

Control over risk involves the first two elements of risk management defined in paragraph 1.61; that is (i) the capability to make decisions to take on, lay off, or decline a risk-bearing opportunity, together with the actual performance of that decision-making function and (ii) the capability to make decisions on whether and how to respond to the risks associated with the opportunity, together with the actual performance of that decision-making function. It is not necessary for a party to perform the day-to-day mitigation, as described in (iii) in order to have control of the risks. Such day-to-day mitigation may be outsourced, as the example in paragraph 1.63 illustrates. However, where these day-to-day mitigation activities are outsourced, control of the risk would require capability to determine the objectives of the outsourced activities, to decide to hire the provider of the risk mitigation functions, to assess whether the objectives are being adequately met, and, where necessary, to decide to adapt or terminate the contract with that provider, together with the performance of such assessment and decision-making. In accordance with this definition of control, a party requires both capability and functional performance as described above in order to exercise control over a risk ...

Financial capacity to assume risk can be defined as access to funding to take on the risk or to lay off the risk, to pay for the risk mitigation functions and to bear the consequences of the risk if the risk materialises. Access to funding by the party assuming the risk takes into account the available assets and the options realistically available to access additional liquidity, if needed, to cover the costs anticipated to arise should the risk materialise. This assessment should be made on the basis that the party assuming the risk is operating as an unrelated party in the same circumstances as the associated enterprise, as accurately delineated under the principles of this section. For example, exploitation of rights in an income-generating asset could open up funding possibilities for that party. Where a party assuming risk receives intra-group funding to meet the funding demands in relation to the risk, the party providing the funding may assume financial risk but does not, merely as a consequence of providing funding, assume the specific risk that gives rise to the need for additional funding. Where the financial capacity to assume a risk is lacking, then the allocation of risk requires further consideration under step 5 ...

Risk management is not the same as assuming a risk. Risk assumption means taking on the upside and downside consequences of the risk with the result that the party assuming a risk will also bear the financial and other consequences if the risk materialises. A party performing part of the risk management functions may not assume the risk that is the subject of its management activity, but may be hired to perform risk mitigation functions under the direction of the risk-assuming party. For example, the day-to-day mitigation of product recall risk may be outsourced to a party performing monitoring of quality control over a specific manufacturing process according to the specifications of the party assuming the risk ...

Some risk management functions can be undertaken only by the party performing functions and using assets in creating and pursuing commercial opportunities, while other risk management functions can be undertaken by a different party. Risk management should not be thought of as necessarily encompassing a separate function, requiring separate remuneration, distinct from the performance of the activities that optimise profits. For example, the development of intangibles through development activities may involve mitigating risks relating to performing the development according to specifications at the highest possible standards and on time; the particular risks might be mitigated through the performance of the development function itself. For example, if the contractual arrangement between the associated enterprises is a contract R&D arrangement that is respected under the requirements of this section, remuneration for risk mitigation functions performed through the development activity would be incorporated into the arm’s length services payment. Neither the intangible risk itself, nor the residual income associated with such risk, would be allocated to the service provider. See also Example 1 in paragraph 1.83 ...

In this section references are made to terms that require initial explanation and definition. The term “risk management” is used to refer to the function of assessing and responding to risk associated with commercial activity. Risk management comprises three elements: (i) the capability to make decisions to take on, lay off, or decline a risk-bearing opportunity, together with the actual performance of that decision-making function, (ii) the capability to make decisions on whether and how to respond to the risks associated with the opportunity, together with the actual performance of that decision-making function, and (iii) the capability to mitigate risk, that is the capability to take measures that affect risk outcomes, together with the actual performance of such risk mitigation ...

The steps in the process set out in the rest of this section for analysing risk in a controlled transaction, in order to accurately delineate the actual transaction in respect to that risk, can be summarised as follows: Identify economically significant risks with specificity (see Section D.1.2.1.1). Determine how specific, economically significant risks are contractually assumed by the associated enterprises under the terms of the transaction (see Section D. 1.2.1.2). Determine through a functional analysis how the associated enterprises that are parties to the transaction operate in relation to assumption and management of the specific, economically significant risks, and in particular which enterprise or enterprises perform control functions and risk mitigation functions, which enterprise or enterprises encounter upside or downside consequences of risk outcomes, and which enterprise or enterprises have the financial capacity to assume the risk (see Section D. 1.2.1.3). Steps 2-3 will have identified information relating to the assumption and management of risks in the controlled transaction. The next step is to interpret the information and determine whether the contractual assumption of risk is consistent with the conduct of the associated enterprises and other facts of the case by analysing (i) whether the associated enterprises follow the contractual terms under the principles of Section D. 1.1; and (ii) whether the party assuming risk, as analysed under (i), exercises control over the risk and has the financial capacity to assume the risk (see Section D. 1.2.1.4). Where the party assuming risk under steps 1-4(i) does not control the risk or does not have the financial capacity to assume the risk, apply the guidance on allocating risk (see Section D. 1.2.1.5). The actual transaction as accurately delineated by considering the evidence of all the economically relevant characteristics of the transaction as set out in the guidance in Section D. 1, should then be priced taking into account the financial and other consequences of risk assumption, as appropriately allocated, and appropriately compensating risk management functions (see Section D. 1.2.1.6) ...

This section provides guidance on the nature and sources of risk relevant to a transfer pricing analysis in order to help identify relevant risks with specificity. In addition, this section provides guidance on risk assumption under the arm’s length principle. The detailed guidance provided in this section on the analysis of risks as part of a functional analysis covering functions, assets, and risks, should not be interpreted as indicating that risks are more important than functions or assets. The relevance of functions, assets and risks in a specific transaction will need to be determined through a detailed functional analysis. The expanded guidance on risks reflects the practical difficulties presented by risks: risks in a transaction can be harder to identify than functions or assets, and determining which associated enterprise assumes a particular risk in a transaction can require careful analysis ...

The assumption of risks associated with a commercial opportunity affects the profit potential of that opportunity in the open market, and the allocation of risks assumed between the parties to the arrangement affects how profits or losses resulting from the transaction are allocated at arm’s length through the pricing of the transaction. Therefore, in making comparisons between controlled and uncontrolled transactions and between controlled and uncontrolled parties it is necessary to analyse what risks have been assumed, what functions are performed that relate to or affect the assumption or impact of these risks and which party or parties to the transaction assume these risks ...

Risk is inherent in business activities. Enterprises undertake commercial activities because they seek opportunities to make profits, but those opportunities carry uncertainty that the required resources to pursue the opportunities either will be greater than expected or will not generate the expected returns. Identifying risks goes hand in hand with identifying functions and assets and is integral to the process of identifying the commercial or financial relations between the associated enterprises and of accurately delineating the transaction or transactions ...

A functional analysis is incomplete unless the material risks assumed by each party have been identified and considered since the actual assumption of risks would influence the prices and other conditions of transactions between the associated enterprises. Usually, in the open market, the assumption of increased risk would also be compensated by an increase in the expected return, although the actual return may or may not increase depending on the degree to which the risks are actually realised. The level and assumption of risk, therefore, are economically relevant characteristics that can be significant in determining the outcome of a transfer pricing analysis ...

The functional analysis may show that the MNE group has fragmented highly integrated functions across several group companies. There may be considerable interdependencies between the fragmented activities. For example, the separation into different legal entities of logistics, warehousing, marketing, and sales functions may require considerable co-ordination in order that the separate activities interact effectively. Sales activities are likely to be highly dependent on marketing, and fulfilment of sales, including the anticipated impact of marketing activities, would require alignment with stocking processes and logistics capability. That required co-ordination may be performed by some or all of the associated enterprises performing the fragmented activities, performed through a separate co-ordination function, or performed through a combination of both. Risk may be mitigated through contributions from all the parties, or risk mitigation activities may be undertaken mainly by the co-ordination function. Therefore, when conducting a functional analysis to identify the commercial or financial relations in fragmented activities, it will be important to determine whether those activities are highly interdependent, and, if so, the nature of the interdependencies and how the commercial activity to which the associated enterprises contribute is co-ordinated ...

The functional analysis should consider the type of assets used, such as plant and equipment, the use of valuable intangibles, financial assets, etc., and the nature of the assets used, such as the age, market value, location, property right protections available, etc ...

Therefore, the process of identifying the economically relevant characteristics of the commercial or financial relations should include consideration of the capabilities of the parties, how such capabilities affect options realistically available, and whether similar capabilities are reflected in potentially comparable arm’s length arrangements ...

The actual contributions, capabilities, and other features of the parties can influence the options realistically available to them. For example, an associated enterprise provides logistics services to the group. The logistics company is required to operate warehouses with spare capacity and in several locations in order to be able to cope in the event that supply is disrupted at any one location. The option of greater efficiency through consolidation of locations and reduction in excess capacity is not available. Its functions and assets may, therefore, be different to those of an independent logistics company if that independent service provider did not offer the same capabilities to reduce the risk of disruption to supply ...

In transactions between two independent enterprises, compensation usually will reflect the functions that each enterprise performs (taking into account assets used and risks assumed). Therefore, in delineating the controlled transaction and determining comparability between controlled and uncontrolled transactions or entities, a functional analysis is necessary. This functional analysis seeks to identify the economically significant activities and responsibilities undertaken, assets used or contributed, and risks assumed by the parties to the transactions. The analysis focuses on what the parties actually do and the capabilities they provide. Such activities and capabilities will include decision-making, including decisions about business strategy and risks. For this purpose, it may be helpful to understand the structure and organisation of the MNE group and how they influence the context in which the MNE operates. In particular, it is important to understand how value is generated by the group as a whole, the interdependencies of the functions performed by the associated enterprises with the rest of the group, and the contribution that the associated enterprises make to that value creation. It will also be relevant to determine the legal rights and obligations of each of the parties in performing their functions. While one party may provide a large number of functions relative to that of the other party to the transaction, it is the economic significance of those functions in terms of their frequency, nature, and value to the respective parties to the transactions that is important ...

The difference between ex ante and ex post returns discussed in particular in Section D of Chapter VI arises in large part from risks associated with the uncertainty of future business outcomes. As discussed in paragraph 1.78 the ex ante contractual assumption of risk should provide clear evidence of a commitment to assume risk prior to the materialisation of risk outcomes. Following the steps in this section, the transfer pricing analysis will determine the accurate delineation of the transaction with respect to risk, including the risk associated with unanticipated returns. A party which, under these steps, does not assume the risk, nor contributes to the control of that risk, will not be entitled to unanticipated profits (or required to bear unanticipated losses) arising from that risk. In the circumstances of Example 3 (see paragraph 1.85), this would mean that neither unanticipated profits nor unanticipated losses will be allocated to Company A. Accordingly, if the asset in Example 3 were unexpectedly destroyed, resulting in an unanticipated loss, that loss would be allocated for transfer pricing purposes to the company or companies that control the investment risk, contribute to the control of that risk and have the financial capacity to assume that risk, and that would be entitled to unanticipated profits or losses with respect to the asset. That company or companies would be required to compensate Company A for the return to which it is entitled as described in paragraph 1.103 ...

A party should always be appropriately compensated for its control functions in relation to risk. Usually, the compensation will derive from the consequences of being allocated risk, and therefore that party will be entitled to receive the upside benefits and to incur the downside costs. In circumstances where a party contributes to the control of risk, but does not assume the risk, compensation which takes the form of a sharing in the potential upside and downside, commensurate with that contribution to control, may be appropriate ...

Guidance on the relationship between risk assumption in relation to the provision of funding and the operational activities for which the funds are used is given in paragraphs 6.60-6.64. The concepts reflected in these paragraphs are equally applicable to investments in assets other than intangibles ...

The consequences of risk allocation in Example 3 in paragraph 1.85 depend on analysis of functions under step 3. Company A does not have control over the economically significant risks associated with the investment in and exploitation of the asset, and those risks should be aligned with control of those risks by Companies B and C. The functional contribution of Company A is limited to providing financing for an amount equating to the cost of the asset that enables the asset to be created and exploited by Companies B and C. However, the functional analysis also provides evidence that Company A has no capability and authority to control the risk of investing in a financial asset. Company A does not have the capability to make decisions to take on or decline the financing opportunity, or the capability to make decisions on whether and how to respond to the risks associated with the financing opportunity. Company A does not perform functions to evaluate the financing opportunity, does not consider the appropriate risk premium and other issues to determine the appropriate pricing of the financing opportunity, and does not evaluate the appropriate protection of its financial investment. In the circumstances of Example 3, Company A would not be entitled to any more than a risk-free return as an appropriate measure of the profits it is entitled to retain, since it lacks the capability to control the risk associated with investing in a riskier financial asset. The risk will be allocated to the enterprise which has control and the financial capacity to assume the risk associated with the financial asset. In the circumstances of example, this would be Company B. Company A does not control the investment risk that carries a potential risk premium. An assessment may be necessary of the commercial rationality of the transaction based on the guidance in Section D.2 taking into account the full facts and circumstances of the transaction. (Company A could potentially be entitled to less than a risk-free return if, for example, the transaction is disregarded under Section D.2.) ...

In the circumstances of Example 2 in paragraph 1.84, the significant risks associated with generating a return from the manufacturing activities are controlled by Company A, and the upside and downside consequences of those risks should therefore be allocated to Company A. Company B controls the risk that it fails to competently deliver services, and its remuneration should take into account that risk, as well as its funding costs for the acquisition of the manufacturing plant. Since the risks in relation to the capacity utilisation of the asset are controlled by Company A, Company A should be allocated the risk of under-utilisation. This means that the financial consequences related to the materialisation of that risk including failure to cover fixed costs, write-downs, or closure costs should be allocated to Company A ...

In the circumstances of Example 1 in paragraph 1.83, Company A assumes and controls the development risk and should bear the financial consequences of failure and enjoy the financial consequences of success. Company B should be appropriately rewarded for the carrying out of its development services, incorporating the risk that it fails to do so competently ...

Following the guidance in this section, the accurately delineated transaction should then be priced in accordance with the tools and methods available to taxpayers and tax administrations set out in the following chapters of these Guidelines and taking into account the financial and other consequences of risk-assumption, and the remuneration for risk management. The assumption of a risk should be compensated with an appropriate anticipated return, and risk mitigation should be appropriately remunerated. Thus, a taxpayer that both assumes and mitigates a risk will be entitled to greater anticipated remuneration than a taxpayer that only assumes a risk, or only mitigates, but does not do both ...

In exceptional circumstances, it may be the case that no associated enterprise can be identified that both exercises control over the risk and has the financial capacity to assume the risk. As such a situation is not likely to occur in transactions between third parties, a rigorous analysis of the facts and circumstances of the case will need to be performed, in order to identify the underlying reasons and actions that led to this situation. Based on that assessment, the tax administrations will determine what adjustments to the transaction are needed for the transaction to result in an arm’s length outcome. An assessment of the commercial rationality of the transaction based on Section D.2 may be necessary ...

If it is established in step 4(ii) that the associated enterprise assuming the risk based on steps 1 – 4(i) does not exercise control over the risk or does not have the financial capacity to assume the risk, then the risk should be allocated to the enterprise exercising control and having the financial capacity to assume the risk. If multiple associated enterprises are identified that both exercise control and have the financial capacity to assume the risk, then the risk should be allocated to the associated enterprise or group of associated enterprises exercising the most control. The other parties performing control activities should be remunerated appropriately, taking into account the importance of the control activities performed ...

In light of the potential complexity that may arise in some circumstances when determining whether an associated enterprise assuming a risk controls that risk, the test of control should be regarded as being met where comparable risk assumptions can be identified in a comparable uncontrolled transaction. To be comparable those risk assumptions require that the economically relevant characteristics of the transactions are comparable. If such a comparison is made, it is particularly relevant to establish that the enterprise assuming comparable risk in the uncontrolled transaction performs comparable risk management functions relating to control of that risk to those performed by the associated enterprise assuming risk in the controlled transaction. The purpose of the comparison is to establish that an independent party assuming a comparable risk to that assumed by the associated enterprise also performs comparable risk management functions to those performed by the associated enterprise ...

If it is established that the associated enterprise assuming the risk as analysed under step 4(i) either does not control the risk or does not have the financial capacity to assume the risk, then the analysis described under step 5 needs to be performed ...

Where two or more parties to the transaction assume a specific risk (as analysed under step 4(i)), and in addition they together control the specific risk and each has the financial capacity to assume their share of the risk, then that assumption of risk should be respected. Examples may include the contractual assumption of development risk under a transaction in which the enterprises agree jointly to bear the costs of creating a new product ...

Furthermore, in some cases, there may be more than one party to the transaction exercising control over a specific risk. Where the associated enterprise assuming risk (as analysed under step 4(i)) controls that risk in accordance with the requirements set out in paragraphs 1.65 – 1.66, all that remains under step 4(ii) is to consider whether the enterprise has the financial capacity to assume the risk. If so, the fact that other associated enterprises also exercise control over the same risk does not affect the assumption of that risk by the first-mentioned enterprise, and step 5 need not be considered ...

In some cases, the analysis under step 3 may indicate that there is more than one MNE that is capable of exercising control over a risk. However, control requires both capability and functional performance in order to exercise control over a risk. Therefore, if more than one party is capable of exercising control, but the entity contractually assuming risk (as analysed under step 4(i)) is the only party that actually exercises control through capability and functional performance, then the party contractually assuming the risk also controls the risk ...

In the circumstances of Example 3, analysis under step 4(i) shows that the assumption of utilisation risk by Company A is consistent with its contractual arrangements with Company C, but under step 4(ii) it is determined that Company A does not control risks that it assumes associated with the investment in and exploitation of the asset. Company A has no decision-making function which allows it to control its risks by taking decisions that affect the outcomes of the risks. Under step 4(ii) the party assuming risk does not control that risk, and further consideration is required under step 5 ...

If the circumstances of Example 2 remain the same except for the fact that, while the contract specifies that Company A assumes supply chain risks, Company B is not reimbursed by Company A when there was a failure to secure key components on time, the analysis under step 4(i) would show that contractual assumption of risk has not been followed in practice in regard to that supply chain risk, such that Company B in fact assumes the downside consequences of that risk. Based on the information provided in Example 2, Company B does not have any control over the supply chain risk, whereas Company A does exercise control. Therefore, the party assuming risk as analysed under step 4(i), does not under step 4(ii) exercise control over that risk, and further consideration is required under step 5 ...

Under step 4(ii) it should be determined whether the party assuming the risk under the contract, taking into account whether the contractual terms have been applied in the conduct of the parties under step 4(i), controls the risk and has the financial capacity to assume the risk. If all the circumstances set out in Example 1 remain the same except for the fact that the contract between Company A and Company B allocates development risk to Company B, and if there is no evidence from the conduct of the parties under step 4(i) to suggest that the contractual allocation of risk is not being followed, then Company B contractually assumes development risk but the facts remain that Company B has no capability to evaluate the development risk and does not make decisions about Company A’s activities. Company B has no decision-making function which allows it to control the development risk by taking decisions that affect the outcomes of that risk. Based on the information provided in Example 1, the development risk is controlled by Company A. The determination that the party assuming a risk is not the party controlling that risk means that further consideration is required under step 5 ...

Consider for example, a manufacturer, whose functional currency is US dollars, that sells goods to an associated distributor in another country, whose functional currency is euros, and the written contract states that the distributor assumes all exchange rate risks in relation to this controlled transaction. If, however, the price for the goods is charged by the manufacturer to the distributor over an extended period of time in euros, the currency of the distributor, then aspects of the written contractual terms do not reflect the actual commercial or financial relations between the parties. The assumption of risk in the transaction should be determined by the actual conduct of the parties in the context of the contractual terms, rather than by aspects of written contractual terms which are not in practice applied. The principle can be further illustrated by Example 7 in the Annex to Chapter VI, where there is an inconsistency between the contractual assumption of risk and the conduct of the parties as evidenced by the bearing of costs relating to the downside outcome of that risk ...

In line with the discussion in relation to contractual terms (see Section D.1.1), it should be considered under step 4(i) whether the parties’ conduct conforms to the assumption of risk contained in written contracts, or whether the contractual terms have not been followed or are incomplete. Where differences exist between contractual terms related to risk and the conduct of the parties which are economically significant and would be taken into account by third parties in pricing the transaction between them, the parties’ conduct in the context of the consistent contractual terms should generally be taken as the best evidence concerning the intention of the parties in relation to the assumption of risk ...

The significance of step 4 will depend on the findings. In the circumstances of Examples 1 and above, the step may be straightforward. Where a party contractually assuming a risk applies that contractual assumption of risk in its conduct, and also both exercises control over the risk and has the financial capacity to assume the risk, then there is no further analysis required beyond step 4(i) and (ii) to determine risk assumption. Companies A and B in both examples fulfil the obligations reflected in the contracts and exercise control over the risks that they assume in the transaction, supported by financial capacity. As a result step 4(ii) is satisfied, there is no need to consider step 5, and the next step to consider is step 6 ...

Carrying out steps 1-3 involves the gathering of information relating to the assumption and management of risks in the controlled transaction. The next step is to interpret the information resulting from steps 1-3 and to determine whether the contractual assumption of risk is consistent with the conduct of the parties and the other facts of the case by analysing (i) whether the associated enterprises follow the contractual terms under the principles of Section D.1.1; and (ii) whether the party assuming risk, as analysed under (i), exercises control over the risk and has the financial capacity to assume risk ...

Company A has acquired ownership of a tangible asset and enters into contracts for the use of the asset with unrelated customers. Under step 1 utilisation of the tangible asset, that is the risk that there will be insufficient demand for the asset to cover the costs Company A has incurred, has been identified as an economically significant risk. Under step 2 it is established that Company A has a contract for the provision of services with another group company, Company C; the contract does not address the assumption of utilisation risk by the owner of the tangible asset, Company A. The functional analysis under step 3 provides evidence that another group company, Company B, decides that investment in the asset is appropriate in light of anticipated commercial opportunities identified and evaluated by Company B and its assessment of the asset’s anticipated useful life; Company B provides specifications for the asset and the unique features required to respond to the commercial opportunities, and arranges for the asset to be constructed in accordance with its specifications, and for Company A to acquire the asset. Company C decides how to utilise the asset, markets the asset’s capabilities to third-party customers, negotiates the contracts with these third party customers, assures that the asset is delivered to the third parties and installed appropriately. Although it is the legal owner of the asset, Company A does not exercise control over the investment risk in the tangible asset, since it lacks any capability to decide on whether to invest in the particular asset, and whether and how to protect its investment including whether to dispose of the asset. Although it is the owner of the asset, Company A does not exercise control over the utilisation risk, since it lacks any capability to decide whether and how to exploit the asset. It does not have the capability to assess and make decisions relating to the risk mitigation activities performed by other group companies. Instead, risks associated with investing in and exploiting the asset, enhancing upside risk and mitigating downside risk, are controlled by the other group companies. Company A does not have control over the economically significant risks associated with the investment in and exploitation of the asset. The functional contribution of the legal owner of the asset is limited to providing financing for an amount equating to the cost of the asset. However, the functional analysis also provides evidence that Company A has no capability and authority to control the risk of investing in a financial asset. Company A does not have the capability to make decisions to take on or decline the financing opportunity, or the capability to make decisions on whether and how to respond to the risks associated with the financing opportunity. Company A does not perform functions to evaluate the financing opportunity, does not consider the appropriate risk premium and other issues to determine the appropriate pricing of the financing opportunity, and does not evaluate the appropriate protection of its financial investment. Companies A, B and C all have financial capacity to assume their respective risks ...

Company B manufactures products for Company A. Under step 1 capacity utilisation risk and supply chain risk have been identified as economically significant in this transaction, and under step 2 it has been established that under the contract Company A assumes these risks. The functional analysis under step 3 provides evidence that Company B built and equipped its plant to Company A’s specifications, that products are manufactured to technical requirements and designs provided by Company A, that volume levels are determined by Company A, and that Company A runs the supply chain, including the procurement of components and raw materials. Company A also performs regular quality checks of the manufacturing process. Company B builds the plant, employs and trains competent manufacturing personnel, and determines production scheduling based on volume levels determined by Company A. Although Company B has incurred fixed costs, it has no ability to manage the risk associated with the recovery of those costs through determining the production units over which the fixed costs are spread, since Company A determines volumes. Company A also determines significant costs relating to components and raw materials and the security of supply. The evaluation of the evidence concludes that Company B performs manufacturing services. Significant risks associated with generating a return from the manufacturing activities are controlled by Company A. Company B controls the risk that it fails to competently deliver services. Each company has the financial capacity to assume its respective risks ...

Company A seeks to pursue a development opportunity and hires a specialist company, Company B, to perform part of the research on its behalf. Under step 1 development risk has been identified as economically significant in this transaction, and under step 2 it has been established that under the contract Company A assumes development risk. The functional analysis under step 3 shows that Company A controls its development risk through exercising its capability and authority in making a number of relevant decisions about whether and how to take on the development risk. These include the decision to perform part of the development work itself, the decision to seek specialist input, the decision to hire the particular researcher, the decision of the type of research that should be carried out and objectives assigned to it, and the decision of the budget allocated to Company B. Company A has mitigated its risk by taking measures to outsource development activities to Company B which assumes the day-to- day responsibility for carrying out the research under the control of Company A. Company B reports back to Company A at predetermined milestones, and Company A assesses the progress of the development and whether its ongoing objectives are being met, and decides whether continuing investments in the project are warranted in the light of that assessment. Company A has the financial capacity to assume the risk. Company B has no capability to evaluate the development risk and does not make decisions about Company A’s activities. Company B’s risk is mainly to ensure it performs the research activities competently and it exercises its capability and authority to control that risk through making decisions about the processes, expertise, and assets it needs. The risk Company B assumes is distinct from the development risk assumed by Company A under the contract, and which is controlled by Company A based on the evidence of the functional analysis ...

In this step the functions in relation to risk of the associated enterprises that are parties to the transaction are analysed. The analysis provides information about how the associated enterprises operate in relation to the assumption and management of the specific, economically significant risks, and in particular about which enterprise or enterprises perform control functions and risk mitigation functions, which enterprise or enterprises encounter upside or downside consequences of risk outcomes, and which enterprise or enterprises have the financial capacity to assume the risk. This step is illustrated by the following examples and conclusions are drawn from these examples in subsequent paragraphs of Section D.1.2 ...

The assumption of risk has a significant effect on determining arm’s length pricing between associated enterprises, and it should not be concluded that the pricing arrangements adopted in the contractual arrangements alone determine which party assumes risk. Therefore, one may not infer from the fact that the price paid between associated enterprises for goods or services is set at a particular level, or by reference to a particular margin, that risks are borne by those associated enterprises in a particular manner. For example, a manufacturer may claim to be protected from the risk of price fluctuation of raw material as a consequence of its being remunerated by another group company on a basis that takes account of its actual costs. The implication of the claim is that the other group company bears the risk. The form of remuneration cannot dictate inappropriate risk allocations. It is the determination of how the parties actually manage and control risks, as set out in the remaining steps of the process of analysing risk, which will determine the assumption of risks by the parties, and consequently dictate the selection of the most appropriate transfer pricing method ...

However, it does not follow that every contractual exchange of potentially higher but riskier income for lower but less risky income between associated enterprises is automatically arm’s length. The rest of the steps set out in this section describe the information required to determine how the associated enterprises operate in relation to the assumption and management of risk leading to the accurate delineation of the actual transaction in relation to risk ...

It is economically neutral to take on (or lay off) risk in return for higher (or lower) anticipated nominal income as long as the net present value of both options are equal. Between unrelated parties, for example, the sale of a risky income-producing asset may reflect in part a preference of the seller to accept a lower but more certain amount of nominal income and to forego the possibility of higher anticipated nominal income it might earn if it instead retained and exploited the asset. In a without-recourse debt factoring arrangement between independent enterprises, for example, the seller discounts the face value of its receivables in return for a fixed payment, and so accepts a lower return but has reduced its volatility and laid off risk. The factor will often be a specialised organisation which has the capability to decide to take on risk and to decide on how to respond to the risk, including by diversifying the risk and having the functional capabilities to mitigate the risk and generate a return from the opportunity. Neither party will expect to be worse off as a result of entering into the arrangement, essentially because they have different risk preferences resulting from their capabilities in relation to the specific risk. The factor is more capable of managing the risk than the seller and terms acceptable to both parties can be agreed ...

A contractual assumption of risk constitutes an ex ante agreement to bear some or all of the potential costs associated with the ex post materialisation of downside outcomes of risk in return for some or all of the potential benefit associated with the ex post materialisation of positive outcomes. Importantly, ex ante contractual assumption of risk should provide clear evidence of a commitment to assume risk prior to the materialisation of risk outcomes. Such evidence is a very important part of the tax administration’s transfer pricing analysis of risks in commercial or financial relations, since, in practice, an audit performed by the tax administration may occur years after the making of such up-front decisions by the associated enterprises and when outcomes are known. The purported assumption of risk by associated enterprises when risk outcomes are certain is by definition not an assumption of risk, since there is no longer any risk. Similarly, ex post reallocations of risk by a tax administration when risk outcomes are certain may, unless based on the guidance elsewhere in these Guidelines and in particular Section D.1.2.1, be inappropriate ...

The identity of the party or parties assuming risks may be set out in written contracts between the parties to a transaction involving these risks. A written contract typically sets out an intended assumption of risk by the parties. Some risks may be explicitly assumed in the contractual arrangements. For example, a distributor might contractually assume accounts receivable risk, inventory risk, and credit risks associated with the distributor’s sales to unrelated customers. Other risks might be implicitly assumed. For example, contractual arrangements that provide non- contingent remuneration for one of the parties implicitly allocate the outcome of some risks, including unanticipated profits or losses, to the other party ...

Control over a specific risk in a transaction focusses on the decision-making of the parties to the transaction in relation to the specific risk arising from the transaction. This is not to say, however, that in an MNE group other parties may not be involved in setting general policies that are relevant for the assumption and control of the specific risks identified in a transaction, without such policy-setting itself representing decision making. The board and executive committees of the group, for example, may set the level of risk the group as a whole is prepared to accept in order to achieve commercial objectives, and to establish the control framework for managing and reporting risk in its operations. Line management in business segments, operational entities, and functional departments may identify and assess risk against the commercial opportunities, and put in place appropriate controls and processes to address risk and influence the risk outcomes arising from day-to-day operations. The opportunities pursued by operational entities require the ongoing management of the risk that the resources allocated to the opportunity will deliver the anticipated return. For example, finished product inventory risk in a supply transaction between two associated enterprises may be controlled by the party with the capability to determine the production volumes together with the performance of that decision- making. The way that inventory risk in the transaction between two associated enterprises is addressed may be subject to policy-setting elsewhere in the MNE group about overall levels of working capital tied up in inventory, or co-ordination of appropriate minimum stocking levels across markets to meet strategic objectives. This wider policy-setting however cannot be regarded as decisions to take on, lay off, decline, or mitigate the specific inventory risk in the example of the product supply transaction in this paragraph ...

In the second situation, a multinational toy retailer buys a wide range of products from a number of third-party manufacturers. Most of its sales are concentrated in the last two months of the calendar year, and a significant risk relates to the strategic direction of the buying function, and in making the right bets on trends and determining the products that will sell and in what volumes. Trends and the demand for products can vary across markets, and so expertise is needed to evaluate the right bets in the local market. The effect of the buying risk can be magnified if the retailer negotiates a period of exclusivity for a particular product with the third- party manufacturer ...

In the first situation the MNE group distributes heating oil to consumers. Analysis of the economically relevant characteristics establishes that the product is undifferentiated, the market is competitive, the market size is predictable, and players are price-takers. In such circumstances, the ability to influence margins may be limited. The credit terms achieved from managing the relationship with the oil suppliers fund working capital and are crucial to the distributor’s margin. The impact of the risk on cost of capital is, therefore, significant in the context of how value is created for the distribution function ...

Determining the economic significance of risk and how risk may affect the pricing of a transaction between associated enterprises is part of the broader functional analysis of how value is created by the MNE group, the activities that allow the MNE group to sustain profits, and the economically relevant characteristics of the transaction. The analysis of risk also helps to determine comparability under the guidance in Chapter III. Where potential comparables are identified, it is relevant to determine whether they include the same level of risks and management of risks. The economic significance of risk may be illustrated by the following two situations ...

Risks can be categorised in various ways, but a relevant framework in a transfer pricing analysis is to consider the sources of uncertainty which give rise to risk. The following non-exclusive list of sources of risk is not intended to suggest a hierarchy of risk. Neither is it intended to provide rigid categories of risk, since there is overlap between the categories. Instead, it is intended to provide a framework that may assist in ensuring that a transfer pricing analysis considers the range of risks likely to arise from the commercial or financial relations of the associated enterprises, and from the context in which those relations take place. Reference is made to risks that are externally driven and those that are internally driven in order to help clarify sources of uncertainty. However, there should be no inference that externally driven risks are less relevant because they are not generated directly by activities. On the contrary, the ability of a company to face, respond to and mitigate externally driven risks is likely to be a necessary condition for a business to remain competitive. Importantly, guidance on the possible range of risk should assist in identifying material risks with specificity. Risks which are vaguely described or undifferentiated will not serve the purposes of a transfer pricing analysis seeking to delineate the actual transaction and the actual allocation of risk between the parties. a) Strategic risks or marketplace risks. These are largely external risks caused by the economic environment, political and regulatory events, competition, technological advance, or social and environmental changes. The assessment of such uncertainties may define the products and markets the company decides to target, and the capabilities it requires, including investment in intangibles and tangible assets, as well as in the talent of its human capital. There is considerable potential downside, but the upside is also considerable if the company identifies correctly the impact of external risks, and differentiates its products and secures and continues to protect competitive advantage. Examples of such risks may include marketplace trends, new geographical markets, and concentration of development investment. b) Infrastructure or operational risks. These are likely to include the uncertainties associated with the company’s business execution and may include the effectiveness of processes and operations. The impact of such risks is highly dependent on the nature of the activities and the uncertainties the company chooses to assume. In some circumstances breakdowns can have a crippling effect on the company’s operations or reputation and threaten its existence; whereas successful management of such risks can enhance reputation. In other circumstances, the failure to bring a product to market on time, to meet demand, to meet specifications, or to produce to high standards, can affect competitive and reputational position, and give advantage to companies which bring competing products to market more quickly, better exploit periods of market protection provided by, for example, patents, better manage supply chain risks and quality control. Some infrastructure risks are externally driven and may involve transport links, political and social situations, laws and regulations, whereas others are internally driven and may involve capability and availability of assets, employee capability, process design and execution, outsourcing arrangements, and IT systems. c) Financial risks. All risks are likely to affect a company’s financial performance, but there are specific financial risks related to the company’s ability to manage liquidity and cash flow, financial capacity, and creditworthiness. The uncertainty can be externally driven, for example by economic shock or credit crisis, but can also be internally driven through controls, investment decisions, credit terms, and through outcomes of infrastructure or operational risks. d) Transactional risks. These are likely to include pricing and payment terms in a commercial transaction for the supply of goods, property, or services. e) Hazard risks. These are likely to include adverse external events that may cause damages or losses, including accidents and natural disasters. Such risks can often be mitigated through insurance, but insurance may not cover all the potential loss, particularly where there are significant impacts on operations or reputation ...

There are many definitions of risk, but in a transfer pricing context it is appropriate to consider risk as the effect of uncertainty on the objectives of the business. In all of a company’s operations, every step taken to exploit opportunities, every time a company spends money or generates income, uncertainty exists, and risk is assumed. A company is likely to direct much attention to identifying uncertainties it encounters, in evaluating whether and how business opportunities should be pursued in view of their inherent risks, and in developing appropriate risk mitigation strategies which are important to shareholders seeking their required rate of return. Risk is associated with opportunities, and does not have downside connotations alone; it is inherent in commercial activity, and companies choose which risks they wish to assume in order to have the opportunity to generate profits. No profit- seeking business takes on risk associated with commercial opportunities without expecting a positive return. Downside impact of risk occurs when the anticipated favourable outcomes fail to materialise. For example, a product may fail to attract as much consumer demand as projected. However, such an event is the downside manifestation of uncertainty associated with commercial opportunities. Companies are likely to devote considerable attention to identifying and managing economically significant risks in order to maximise the positive returns from having pursued the opportunity in the face of risk. Such attention may include activities around determining the product strategy, how the product is differentiated, how to identify changing market trends, how to anticipate political and social changes, and how to create demand. The significance of a risk depends on the likelihood and size of the potential profits or losses arising from the risk. For example, a different flavour of ice-cream may not be the company’s sole product, the costs of developing, introducing, and marketing the product may have been marginal, the success or failure of the product may not create significant reputational risks so long as business management protocols are followed, and decision-making may have been effected by delegation to local or regional management who can provide knowledge of local tastes. However, ground-breaking technology or an innovative healthcare treatment may represent the sole or major product, involve significant strategic decisions at different stages, require substantial investment costs, create significant opportunities to make or break reputation, and require centralised management that would be of keen interest to shareholders and other stakeholders ...

Assume that an investor hires a fund manager to invest funds on its account. Depending on the agreement between the investor and the fund manager, the latter may be given the authority to make portfolio investments on behalf of the investor on a day-to-day basis in a way that reflects the risk preferences of the investor, although the risk of loss in value of the investment would be borne by the investor. In such an example, the investor is controlling its risks through four relevant decisions: the decision about its risk preference and therefore about the required diversification of the risks attached to the different investments that are part of the portfolio, the decision to hire (or terminate the contract with) that particular fund manager, the decision of the extent of the authority it gives to the fund manager and objectives it assigns to the latter, and the decision of the amount of the investment that it asks this fund manager to manage. Moreover, the fund manager would generally be required to report back to the investor on a regular basis as the investor would want to assess the outcome of the fund manager’s activities. In such a case, the fund manager is providing a service and managing his business risk from his own perspective (e.g. to protect his credibility). The fund manager’s operational risk, including the possibility of losing a client, is distinct from his client’s investment risk. This illustrates the fact that an investor who gives to another person the authority to perform risk mitigation activities such as those performed by the fund manager does not necessarily transfer control of the investment risk to the person making these day-to-day decisions ...

The concept of control may be illustrated by the following examples. Company A appoints a specialist manufacturer, Company B to manufacture products on its behalf. The contractual arrangements indicate that Company B undertakes to perform manufacturing services, but that the product specifications and designs are provided by Company A, and that Company A determines production scheduling, including the volumes and timing of product delivery. The contractual relations imply that Company A bears the inventory risk and the product recall risk. Company A hires Company C to perform regular quality controls of the production process. Company A specifies the objectives of the quality control audits and the information that Company C should gather on its behalf. Company C reports directly to Company A. Analysis of the economically relevant characteristics shows that Company A controls its product recall and inventory risks by exercising its capability and authority to make a number of relevant decisions about whether and how to take on risk and how to respond to the risks. Besides that Company A has the capability to assess and take decisions relating to the risk mitigation functions and actually performs these functions. These include determining the objectives of the outsourced activities, the decision to hire the particular manufacturer and the party performing the quality checks, the assessment of whether the objectives are adequately met, and, where necessary, to decide to adapt or terminate the contracts ...

Risk mitigation refers to measures taken that are expected to affect risk outcomes. Such measures may include measures that reduce the uncertainty or measures that reduce the consequences in the event that the downside impact of risk occurs. Control should not be interpreted as requiring risk mitigation measures to be adopted, since in assessing risks businesses may decide that the uncertainty associated with some risks, including risks that may be fundamental to their core business operations, after being evaluated, should be taken on and faced in order to create and maximise opportunities ...

References to control over risk should not necessarily be taken to mean that the risk itself can be influenced or that the uncertainty can be nullified. Some risks cannot be influenced, and are a general condition of commercial activity affecting all businesses undertaking that activity. For example, risks associated with general economic conditions or commodity price cycles are typically beyond the scope of an MNE group to influence. Instead control over risk should be understood as the capability and authority to decide to take on the risk, and to decide whether and how to respond to the risk, for example through the timing of investments, the nature of development programmes, the design of marketing strategies, or the setting of production levels ...

The capability to perform decision-making functions and the actual performance of such decision-making functions relating to a specific risk involve an understanding of the risk based on a relevant analysis of the information required for assessing the foreseeable downside and upside risk outcomes of such a decision and the consequences for the business of the enterprise. Decision-makers should possess competence and experience in the area of the particular risk for which the decision is being made and possess an understanding of the impact of their decision on the business. They should also have access to the relevant information, either by gathering this information themselves or by exercising authority to specify and obtain the relevant information to support the decision-making process. In doing so, they require capability to determine the objectives of the gathering and analysis of the information, to hire the party gathering the information and making the analyses, to assess whether the right information is gathered and the analyses are adequately made, and, where necessary, to decide to adapt or terminate the contract with that provider, together with the performance of such assessment and decision-making. Neither a mere formalising of the outcome of decision-making in the form of, for example, meetings organised for formal approval of decisions that were made in other locations, minutes of a board meeting and signing of the documents relating to the decision, nor the setting of the policy environment relevant for the risk (see paragraph 1.76), qualifies as the exercise of a decision-making function sufficient to demonstrate control over a risk ...

Control over risk involves the first two elements of risk management defined in paragraph 1.61; that is (i) the capability to make decisions to take on, lay off, or decline a risk-bearing opportunity, together with the actual performance of that decision-making function and (ii) the capability to make decisions on whether and how to respond to the risks associated with the opportunity, together with the actual performance of that decision-making function. It is not necessary for a party to perform the day-to-day mitigation, as described in (iii) in order to have control of the risks. Such day-to-day mitigation may be outsourced, as the example in paragraph 1.63 illustrates. However, where these day-to-day mitigation activities are outsourced, control of the risk would require capability to determine the objectives of the outsourced activities, to decide to hire the provider of the risk mitigation functions, to assess whether the objectives are being adequately met, and, where necessary, to decide to adapt or terminate the contract with that provider, together with the performance of such assessment and decision-making. In accordance with this definition of control, a party requires both capability and functional performance as described above in order to exercise control over a risk ...

Financial capacity to assume risk can be defined as access to funding to take on the risk or to lay off the risk, to pay for the risk mitigation functions and to bear the consequences of the risk if the risk materialises. Access to funding by the party assuming the risk takes into account the available assets and the options realistically available to access additional liquidity, if needed, to cover the costs anticipated to arise should the risk materialise. This assessment should be made on the basis that the party assuming the risk is operating as an unrelated party in the same circumstances as the associated enterprise, as accurately delineated under the principles of this section. For example, exploitation of rights in an income-generating asset could open up funding possibilities for that party. Where a party assuming risk receives intra-group funding to meet the funding demands in relation to the risk, the party providing the funding may assume financial risk but does not, merely as a consequence of providing funding, assume the specific risk that gives rise to the need for additional funding. Where the financial capacity to assume a risk is lacking, then the allocation of risk requires further consideration under step 5 ...

Risk management is not the same as assuming a risk. Risk assumption means taking on the upside and downside consequences of the risk with the result that the party assuming a risk will also bear the financial and other consequences if the risk materialises. A party performing part of the risk management functions may not assume the risk that is the subject of its management activity, but may be hired to perform risk mitigation functions under the direction of the risk-assuming party. For example, the day-to-day mitigation of product recall risk may be outsourced to a party performing monitoring of quality control over a specific manufacturing process according to the specifications of the party assuming the risk ...

Some risk management functions can be undertaken only by the party performing functions and using assets in creating and pursuing commercial opportunities, while other risk management functions can be undertaken by a different party. Risk management should not be thought of as necessarily encompassing a separate function, requiring separate remuneration, distinct from the performance of the activities that optimise profits. For example, the development of intangibles through development activities may involve mitigating risks relating to performing the development according to specifications at the highest possible standards and on time; the particular risks might be mitigated through the performance of the development function itself. For example, if the contractual arrangement between the associated enterprises is a contract R&D arrangement that is respected under the requirements of this section, remuneration for risk mitigation functions performed through the development activity would be incorporated into the arm’s length services payment. Neither the intangible risk itself, nor the residual income associated with such risk, would be allocated to the service provider. See also Example 1 in paragraph 1.83 ...

In this section references are made to terms that require initial explanation and definition. The term “risk management” is used to refer to the function of assessing and responding to risk associated with commercial activity. Risk management comprises three elements: (i) the capability to make decisions to take on, lay off, or decline a risk-bearing opportunity, together with the actual performance of that decision-making function, (ii) the capability to make decisions on whether and how to respond to the risks associated with the opportunity, together with the actual performance of that decision-making function, and (iii) the capability to mitigate risk, that is the capability to take measures that affect risk outcomes, together with the actual performance of such risk mitigation ...

The steps in the process set out in the rest of this section for analysing risk in a controlled transaction, in order to accurately delineate the actual transaction in respect to that risk, can be summarised as follows: Identify economically significant risks with specificity (see Section D.1.2.1.1). Determine how specific, economically significant risks are contractually assumed by the associated enterprises under the terms of the transaction (see Section D. 1.2.1.2). Determine through a functional analysis how the associated enterprises that are parties to the transaction operate in relation to assumption and management of the specific, economically significant risks, and in particular which enterprise or enterprises perform control functions and risk mitigation functions, which enterprise or enterprises encounter upside or downside consequences of risk outcomes, and which enterprise or enterprises have the financial capacity to assume the risk (see Section D. 1.2.1.3). Steps 2-3 will have identified information relating to the assumption and management of risks in the controlled transaction. The next step is to interpret the information and determine whether the contractual assumption of risk is consistent with the conduct of the associated enterprises and other facts of the case by analysing (i) whether the associated enterprises follow the contractual terms under the principles of Section D. 1.1; and (ii) whether the party assuming risk, as analysed under (i), exercises control over the risk and has the financial capacity to assume the risk (see Section D. 1.2.1.4). Where the party assuming risk under steps 1-4(i) does not control the risk or does not have the financial capacity to assume the risk, apply the guidance on allocating risk (see Section D. 1.2.1.5). The actual transaction as accurately delineated by considering the evidence of all the economically relevant characteristics of the transaction as set out in the guidance in Section D. 1, should then be priced taking into account the financial and other consequences of risk assumption, as appropriately allocated, and appropriately compensating risk management functions (see Section D. 1.2.1.6) ...

This section provides guidance on the nature and sources of risk relevant to a transfer pricing analysis in order to help identify relevant risks with specificity. In addition, this section provides guidance on risk assumption under the arm’s length principle. The detailed guidance provided in this section on the analysis of risks as part of a functional analysis covering functions, assets, and risks, should not be interpreted as indicating that risks are more important than functions or assets. The relevance of functions, assets and risks in a specific transaction will need to be determined through a detailed functional analysis. The expanded guidance on risks reflects the practical difficulties presented by risks: risks in a transaction can be harder to identify than functions or assets, and determining which associated enterprise assumes a particular risk in a transaction can require careful analysis ...

The assumption of risks associated with a commercial opportunity affects the profit potential of that opportunity in the open market, and the allocation of risks assumed between the parties to the arrangement affects how profits or losses resulting from the transaction are allocated at arm’s length through the pricing of the transaction. Therefore, in making comparisons between controlled and uncontrolled transactions and between controlled and uncontrolled parties it is necessary to analyse what risks have been assumed, what functions are performed that relate to or affect the assumption or impact of these risks and which party or parties to the transaction assume these risks ...

Risk is inherent in business activities. Enterprises undertake commercial activities because they seek opportunities to make profits, but those opportunities carry uncertainty that the required resources to pursue the opportunities either will be greater than expected or will not generate the expected returns. Identifying risks goes hand in hand with identifying functions and assets and is integral to the process of identifying the commercial or financial relations between the associated enterprises and of accurately delineating the transaction or transactions ...

A functional analysis is incomplete unless the material risks assumed by each party have been identified and considered since the actual assumption of risks would influence the prices and other conditions of transactions between the associated enterprises. Usually, in the open market, the assumption of increased risk would also be compensated by an increase in the expected return, although the actual return may or may not increase depending on the degree to which the risks are actually realised. The level and assumption of risk, therefore, are economically relevant characteristics that can be significant in determining the outcome of a transfer pricing analysis ...

The functional analysis may show that the MNE group has fragmented highly integrated functions across several group companies. There may be considerable interdependencies between the fragmented activities. For example, the separation into different legal entities of logistics, warehousing, marketing, and sales functions may require considerable co-ordination in order that the separate activities interact effectively. Sales activities are likely to be highly dependent on marketing, and fulfilment of sales, including the anticipated impact of marketing activities, would require alignment with stocking processes and logistics capability. That required co-ordination may be performed by some or all of the associated enterprises performing the fragmented activities, performed through a separate co-ordination function, or performed through a combination of both. Risk may be mitigated through contributions from all the parties, or risk mitigation activities may be undertaken mainly by the co-ordination function. Therefore, when conducting a functional analysis to identify the commercial or financial relations in fragmented activities, it will be important to determine whether those activities are highly interdependent, and, if so, the nature of the interdependencies and how the commercial activity to which the associated enterprises contribute is co-ordinated ...

The functional analysis should consider the type of assets used, such as plant and equipment, the use of valuable intangibles, financial assets, etc., and the nature of the assets used, such as the age, market value, location, property right protections available, etc ...

Therefore, the process of identifying the economically relevant characteristics of the commercial or financial relations should include consideration of the capabilities of the parties, how such capabilities affect options realistically available, and whether similar capabilities are reflected in potentially comparable arm’s length arrangements ...

The actual contributions, capabilities, and other features of the parties can influence the options realistically available to them. For example, an associated enterprise provides logistics services to the group. The logistics company is required to operate warehouses with spare capacity and in several locations in order to be able to cope in the event that supply is disrupted at any one location. The option of greater efficiency through consolidation of locations and reduction in excess capacity is not available. Its functions and assets may, therefore, be different to those of an independent logistics company if that independent service provider did not offer the same capabilities to reduce the risk of disruption to supply ...

In transactions between two independent enterprises, compensation usually will reflect the functions that each enterprise performs (taking into account assets used and risks assumed). Therefore, in delineating the controlled transaction and determining comparability between controlled and uncontrolled transactions or entities, a functional analysis is necessary. This functional analysis seeks to identify the economically significant activities and responsibilities undertaken, assets used or contributed, and risks assumed by the parties to the transactions. The analysis focuses on what the parties actually do and the capabilities they provide. Such activities and capabilities will include decision-making, including decisions about business strategy and risks. For this purpose, it may be helpful to understand the structure and organisation of the MNE group and how they influence the context in which the MNE operates. In particular, it is important to understand how value is generated by the group as a whole, the interdependencies of the functions performed by the associated enterprises with the rest of the group, and the contribution that the associated enterprises make to that value creation. It will also be relevant to determine the legal rights and obligations of each of the parties in performing their functions. While one party may provide a large number of functions relative to that of the other party to the transaction, it is the economic significance of those functions in terms of their frequency, nature, and value to the respective parties to the transactions that is important ...