Tag: Purchase and resale
§ 1.482-3(c)(4) Example 7.
The facts are the same as in Example 5, except that Product X is branded with a valuable trademark that is owned by P. A, B, and C distribute unbranded competing products, while D and E distribute products branded with other trademarks. D and E do not own any rights in the trademarks under which their products are sold. The value of the products that A, B, and C sold are not similar to the value of the products sold by S. The value of products sold by D and E, however, is similar to that of Product X. Although close product similarity is not as important for a reliable application of the resale price method as for the comparable uncontrolled price method, significant differences in the value of the products involved in the controlled and uncontrolled transactions may affect the reliability of the results. In addition, because in this case it is difficult to determine the effect the trademark will have on price or profits, reliable adjustments for the differences cannot be made. Because D and E have a higher level of comparability than A, B, and C with respect to S, pursuant to § 1.482-1(e)(2)(ii), only D and E may be included in an arm’s length range ...
§ 1.482-3(c)(4) Example 6.
The facts are the same as Example 5, except that sufficient data is not available to determine whether any of the uncontrolled distributors provide warranties or to determine the payment terms of the contracts. Because differences in these contractual terms could materially affect price or profits, the inability to determine whether these differences exist between the controlled and uncontrolled transactions diminishes the reliability of the results of the uncontrolled comparables. However, the reliability of the results may be enhanced by the application of a statistical method when establishing an arm’s length range pursuant to § 1.482-1(e)(2)(iii)(B) ...
§ 1.482-3(c)(4) Example 5.
(i) USP, a U.S. corporation, manufactures Product X, an unbranded widget, and sells it to FSub, its wholly owned foreign subsidiary. FSub acts as a distributor of Product X in country M, and sells it to uncontrolled parties in that country. Uncontrolled distributors A, B, C, D, and E distribute competing products of approximately similar value in country M. All such products are unbranded. (ii) Relatively complete data is available regarding the functions performed and risks borne by the uncontrolled distributors and the contractual terms under which they operate in the uncontrolled transactions. In addition, data is available to ensure accounting consistency between all of the uncontrolled distributors and FSub. Because the available data is sufficiently complete and accurate to conclude that it is likely that all material differences between the controlled and uncontrolled transactions have been identified, such differences have a definite and reasonably ascertainable effect, and reliable adjustments are made to account for such differences, the results of each of the uncontrolled distributors may be used to establish an arm’s length range pursuant to § 1.482-1(e)(2)(iii)(A) ...
§ 1.482-3(c)(4) Example 4.
USSub, a U.S. corporation, is the exclusive distributor of widgets for its foreign parent. To determine whether the gross profit margin of 25% earned by USSub is an arm’s length result, the district director considers applying the resale price method. There are several uncontrolled distributors that perform similar functions under similar circumstances in uncontrolled transactions. However, the uncontrolled distributors treat certain costs such as discounts and insurance as cost of goods sold, while USSub treats such costs as operating expenses. In such cases, accounting reclassifications, pursuant to § 1.482-3(c)(3)(iii)(B), must be made to ensure consistent treatment of such material items. Inability to make such accounting reclassifications will decrease the reliability of the results of the uncontrolled transactions ...
§ 1.482-3(c)(4) Example 3.
FP, a foreign manufacturer, sells Product to USSub, its U.S. subsidiary, which in turn sells Product to its domestic affiliate Sister. Sister sells Product to unrelated buyers. In this case, the applicable resale price is the price at which Sister sells Product in uncontrolled transactions. The determination of the appropriate gross profit margin for the sale from FP to USSub will take into account the functions performed by USSub and Sister, as well as other relevant factors described in § 1.482-1(d)(3) ...
§ 1.482-3(c)(4) Example 2.
(i) S, a U.S. corporation, is the exclusive distributor for FP, its foreign parent. There are no changes in the beginning and ending inventory for the year under review. S’s total reported cost of goods sold is $800, consisting of $600 for property purchased from FP and $200 of other costs of goods sold incurred to unrelated parties. S’s applicable resale price and reported gross profit are as follows: Applicable resale price $1000 Cost of goods sold: Cost of purchases from FP 600 Costs incurred to unrelated parties 200 Reported gross profit 200 (ii) The district director determines that the appropriate gross profit margin is 25%. Therefore, S’s appropriate gross profit is $250 (i.e., 25% of the applicable resale price of $1000). Because S is incurring costs of sales to unrelated parties, an arm’s length price for property purchased from FP must be determined under a two-step process. First, the appropriate gross profit ($250) is subtracted from the applicable resale price ($1000). The resulting amount ($750) is then reduced by the costs of sales incurred to unrelated parties ($200). Therefore, an arm’s length price for S’s cost of sales of FP’s product in this case equals $550 (i.e., $750 minus $200) ...
§ 1.482-3(c)(4) Example 1.
A controlled taxpayer sells property to another member of its controlled group that resells the property in uncontrolled sales. There are no changes in the beginning and ending inventory for the year under review. Information regarding an uncontrolled comparable is sufficiently complete to conclude that it is likely that all material differences between the controlled and uncontrolled transactions have been identified and adjusted for. If the applicable resale price of the property involved in the controlled sale is $100 and the appropriate gross profit margin is 20%, then an arm’s length result of the controlled sale is a price of $80 ($100 minus (20% × $100)) ...
§ 1.482-3(c)(3)(iii)(B) Consistency in accounting.
The degree of consistency in accounting practices between the controlled transaction and the uncontrolled comparables that materially affect the gross profit margin affects the reliability of the result. Thus, for example, if differences in inventory and other cost accounting practices would materially affect the gross profit margin, the ability to make reliable adjustments for such differences would affect the reliability of the results. Further, the controlled transaction and the uncontrolled comparable should be consistent in the reporting of items (such as discounts, returns and allowances, rebates, transportation costs, insurance, and packaging) between cost of goods sold and operating expenses ...
§ 1.482-3(c)(3)(iii)(A) In general.
The reliability of the results derived from the resale price method is affected by the completeness and accuracy of the data used and the reliability of the assumptions made to apply this method. See § 1.482-1(c) (Best method rule) ...
§ 1.482-3(c)(3)(ii)(C) Adjustments for differences between controlled and uncontrolled transactions.
If there are material differences between the controlled and uncontrolled transactions that would affect the gross profit margin, adjustments should be made to the gross profit margin earned with respect to the uncontrolled transaction according to the comparability provisions of § 1.482-1(d)(2). For this purpose, consideration of operating expenses associated with functions performed and risks assumed may be necessary, because differences in functions performed are often reflected in operating expenses. If there are differences in functions performed, however, the effect on gross profit of such differences is not necessarily equal to the differences in the amount of related operating expenses. Specific examples of the factors that may be particularly relevant to this method include – (1) Inventory levels and turnover rates, and corresponding risks, including any price protection programs offered by the manufacturer; (2) Contractual terms (e.g., scope and terms of warranties provided, sales or purchase volume, credit terms, transport terms); (3) Sales, marketing, advertising programs and services, (including promotional programs, rebates, and co-op advertising); (4) The level of the market (e.g., wholesale, retail, etc.); and (5) Foreign currency risks ...
§ 1.482-3(c)(3)(ii)(B) Other comparability factors.
Comparability under this method is less dependent on close physical similarity between the products transferred than under the comparable uncontrolled price method. For example, distributors of a wide variety of consumer durables might perform comparable distribution functions without regard to the specific durable goods distributed. Substantial differences in the products may, however, indicate significant functional differences between the controlled and uncontrolled taxpayers. Thus, it ordinarily would be expected that the controlled and uncontrolled transactions would involve the distribution of products of the same general type (e.g., consumer electronics). Furthermore, significant differences in the value of the distributed goods due, for example, to the value of a trademark, may also affect the reliability of the comparison. Finally, the reliability of profit measures based on gross profit may be adversely affected by factors that have less effect on prices. For example, gross profit may be affected by a variety of other factors, including cost structures (as reflected, for example, in the age of plant and equipment), business experience (such as whether the business is in a start-up phase or is mature), or management efficiency (as indicated, for example, by expanding or contracting sales or executive compensation over time). Accordingly, if material differences in these factors are identified based on objective evidence, the reliability of the analysis may be affected ...
§ 1.482-3(c)(3)(ii)(A) Functional comparability.
The degree of comparability between an uncontrolled transaction and a controlled transaction is determined by applying the comparability provisions of § 1.482-1(d). A reseller’s gross profit provides compensation for the performance of resale functions related to the product or products under review, including an operating profit in return for the reseller’s investment of capital and the assumption of risks. Therefore, although all of the factors described in § 1.482-1(d)(3) must be considered, comparability under this method is particularly dependent on similarity of functions performed, risks borne, and contractual terms, or adjustments to account for the effects of any such differences. If possible, appropriate gross profit margins should be derived from comparable uncontrolled purchases and resales of the reseller involved in the controlled sale, because similar characteristics are more likely to be found among different resales of property made by the same reseller than among sales made by other resellers. In the absence of comparable uncontrolled transactions involving the same reseller, an appropriate gross profit margin may be derived from comparable uncontrolled transactions of other resellers ...
§ 1.482-3(c)(3)(i) In general.
Whether results derived from applications of this method are the most reliable measure of the arm’s length result must be determined using the factors described under the best method rule in § 1.482-1(c). The application of these factors under the resale price method is discussed in paragraphs (c)(3) (ii) and (iii) of this section ...
§ 1.482-3(c)(2)(iv) Arm’s length range.
See § 1.482-1(e)(2) for determination of the arm’s length range ...
§ 1.482-3(c)(2)(iii) Appropriate gross profit.
The appropriate gross profit is computed by multiplying the applicable resale price by the gross profit margin (expressed as a percentage of total revenue derived from sales) earned in comparable uncontrolled transactions ...
§ 1.482-3(c)(2)(ii) Applicable resale price.
The applicable resale price is equal to either the resale price of the particular item of property involved or the price at which contemporaneous resales of the same property are made. If the property purchased in the controlled sale is resold to one or more related parties in a series of controlled sales before being resold in an uncontrolled sale, the applicable resale price is the price at which the property is resold to an uncontrolled party, or the price at which contemporaneous resales of the same property are made. In such case, the determination of the appropriate gross profit will take into account the functions of all members of the group participating in the series of controlled sales and final uncontrolled resales, as well as any other relevant factors described in § 1.482-1(d)(3) ...
§ 1.482-3(c)(2)(i) In general.
The resale price method measures an arm’s length price by subtracting the appropriate gross profit from the applicable resale price for the property involved in the controlled transaction under review ...
§ 1.482-3(c)(1) In general.
The resale price method evaluates whether the amount charged in a controlled transaction is arm’s length by reference to the gross profit margin realized in comparable uncontrolled transactions. The resale price method measures the value of functions performed, and is ordinarily used in cases involving the purchase and resale of tangible property in which the reseller has not added substantial value to the tangible goods by physically altering the goods before resale. For this purpose, packaging, repackaging, labelling, or minor assembly do not ordinarily constitute physical alteration. Further the resale price method is not ordinarily used in cases where the controlled taxpayer uses its intangible property to add substantial value to the tangible goods ...